Impact model: JULES-W1

Sector
Water (global)
Region
global

JULES-W1 (formerly JULES_TUC) is one of the 13 global hydrology models following the ISIMIP2 protocols which form the base of simulations for the ISIMIP2 global water sector outputs; for a full technical description of the ISIMIP2a Simulation Data from Water (global) Sector, see this DOI link: http://doi.org/10.5880/PIK.2017.010

Information for the model JULES-W1 is provided for the simulation rounds shown in the tabs below. Click on the appropriate tab to get the information for the simulation round you are interested in.

Person responsible for model simulations in this simulation round
Emmanouil Grillakis: egrillakis@tuc.gr, 0000-0002-4228-1803, Technical University of Crete (Greece)
Aristeidis Koutroulis: akoutroulis@tuc.gr, 0000-0002-2999-7575, Technical University of Crete (Greece)
Ioannis Tsanis: tsanis@hydromech.gr, Technical University of Crete (Greece)
Additional persons involved: Manolis G. Grillakis
Output Data
Experiments: I, II, III and VIII
Climate Drivers: None
Date: 2017-12-07
Basic information
Model Version: version 4.7
Model Output License: CC BY 4.0
Reference Paper: Main Reference: Best M, Pryor M, Clark D, Rooney G, Essery R, Ménard C, Edwards J, Hendry M, Porson A, Gedney N, Mercado L, Sitch S, Blyth E, Boucher O, Cox P, Grimmond C, Harding R et al. The Joint UK Land Environment Simulator (JULES), Model description – Part 1: Energy and water fluxes. Geoscientific Model Development Discussions,4,595-640,2011
Resolution
Spatial aggregation: regular grid
Horizontal resolution: 0.5°x0.5°
Temporal resolution of input data: climate variables: daily
Temporal resolution of input data: co2: annual
Temporal resolution of input data: soil: constant
Input data
Observed atmospheric climate data sets used: EWEMBI
Emissions data sets used: Atmospheric CO2 concentration
Climate variables: sfcWind, tasmax, tas, tasmin, rlds, rsds, ps, pr
Exceptions to Protocol
Exceptions: River discharge is calculated with the CaMa-Flood v3.6 model (developed by Dai Yamazaki) which uses a different river topography compared to the DDM30 of the ISIMIP2b protocol. River network is therefore inconsistent to ISIMIP2b GHMs using the DDM30 river topography. Upstream area file is available as attachement.
Spin-up
Was a spin-up performed?: Yes
Spin-up design: 10 spinup cycles (1661-1663)
Natural Vegetation
Natural vegetation partition: static vegetation (5 types)
Management & Adaptation Measures
Management: No
Technological Progress
Technological progress: No
Soil
Soil layers: 4 soil layers
Routing
Runoff routing: Runoff simulated by JULES Joint UK Land Environment Simulator - version 4.7 used as input for the global river routing model CaMaFlood 3.6.2 to produce discharge.
Routing data: Routing data are described in Yamazaki, D., Kanae, S., Kim, H. and Oki, T., 2011. A physically based description of floodplain inundation dynamics in a global river routing model. Water Resources Research, 47(4). doi.org/10.1029/2010WR009726
Calibration
Was the model calibrated?: No
Vegetation
Is co2 fertilisation accounted for?: Yes
How is vegetation represented?: Fixed plant characteristics
Methods
Potential evapotranspiration: Penman-Montheith
Snow melt: Energy Balance
Person responsible for model simulations in this simulation round
Emmanouil Grillakis: egrillakis@tuc.gr, 0000-0002-4228-1803, Technical University of Crete (Greece)
Aristeidis Koutroulis: akoutroulis@tuc.gr, 0000-0002-2999-7575, Technical University of Crete (Greece)
Lamprini Papadimitriou: lamprini@hydromech.gr, 0000-0002-4232-4527, Technical University of Crete (Greece)
Ioannis Tsanis: tsanis@hydromech.gr, Technical University of Crete (Greece)
Output Data
Experiments: historical
Climate Drivers: None
Date: 2016-05-11
Basic information
Model Version: version 4.3
Model Output License: CC BY 4.0
Reference Paper: Main Reference: Best M, Pryor M, Clark D, Rooney G, Essery R, Ménard C, Edwards J, Hendry M, Porson A, Gedney N, Mercado L, Sitch S, Blyth E, Boucher O, Cox P, Grimmond C, Harding R et al. The Joint UK Land Environment Simulator (JULES), model description – Part 1: Energy and water fluxes. Geoscientific Model Development,4,677-699,2011
Resolution
Spatial aggregation: regular grid
Horizontal resolution: 0.5°x0.5°
Temporal resolution of input data: climate variables: daily
Temporal resolution of input data: co2: annual
Temporal resolution of input data: land use/land cover: constant
Temporal resolution of input data: soil: constant
Input data
Observed atmospheric climate data sets used: GSWP3, PGMFD v2.1 (Princeton), WATCH-WFDEI
Climate variables: tasmax, tas, tasmin, rlds, wind, rhs, rsds, ps, pr
Exceptions to Protocol
Exceptions: River discharge is calculated with the CaMa-Flood v3.6 model (developed by Dai Yamazaki) which uses a different river topography compared to the DDM30 of the ISIMIP2 protocol. River network is therefore inconsistent to ISIMIP2 GHMs using the DDM30 river topography.
Spin-up
Was a spin-up performed?: Yes
Spin-up design: 10 spinup cycles (1969-1970), plus year 1970
Natural Vegetation
Natural vegetation partition: static vegetation (5 types)
Management & Adaptation Measures
Management: No
Technological Progress
Technological progress: No
Soil
Soil layers: 4 soil layers
Routing
Runoff routing: Runoff simulated by JULES Joint UK Land Environment Simulator - version 4.7 used as input for the global river routing model CaMaFlood 3.6.2 to produce discharge.
Routing data: Routing data are described in Yamazaki, D., Kanae, S., Kim, H. and Oki, T., 2011. A physically based description of floodplain inundation dynamics in a global river routing model. Water Resources Research, 47(4). doi.org/10.1029/2010WR009726
Dams & Reservoirs
Dam and reservoir implementation: Νο
Calibration
Was the model calibrated?: No
Vegetation
Is co2 fertilisation accounted for?: Yes
How is vegetation represented?: Fixed plant characteristics
Methods
Potential evapotranspiration: Penman-Montheith
Snow melt: Energy Balance
Person responsible for model simulations in this simulation round
Emmanouil Grillakis: egrillakis@tuc.gr, 0000-0002-4228-1803, Technical University of Crete (Greece)
Aristeidis Koutroulis: akoutroulis@tuc.gr, 0000-0002-2999-7575, Technical University of Crete (Greece)